MAINTENANCE AND REPAIR OF VARNIQUE OR TUFF-VAR TOPS
- Be sure any spills are cleaned up immediately. Excessive moisture and certain chemicals allowed to stand on a finished surface can cause damage.
- Clean spills or soiled areas with a damp cloth and dry thoroughly.
- Periodically, apply a coat of spray wax, paste wax, or lemon oil to finished surface. This will enhance and protect the finish and insure a moisture barrier is intact in the event the finish becomes scratched or worn.
- Minor scratches and dents can be easily repaired by rubbing the affected area with steel wool or fine grit (#220) sandpaper. Remember, when rubbing or sanding always sand with the grain. Feather edges of repair into the surrounding area. Remove all dust and residue and apply EZ-DO poly gel or a clear lacquer type finish. EZ-DO poly gel can be purchased thru John Boos & Co.. Confine touch-up only to area which has been sanded. Remember, follow manufacturers directions on product label when refinishing.
- Major scratches and gouges where large portions of wood have been removed or damaged should be handled by a professional experienced in furniture repair or a serious do-it-yourselfer with the proper tools and equipment.
- Mineral streaks-Natural coloring of wood due to mineral deposits in the tree. Repair is not required and will add to the individuality of your table. Sizes can range up to a 1/4" wide and up to 3" in length.
